Msha Approved Portable Equipment Electrical

Electrically Operated Equipment Field Approval ... - MSHA

Apr 15, 2015· Individual field approvals will be issued by MSHA under the provisions 30 CFR, Part 18, Subpart E for electrically operated machines commercially built, or constructed, by the owner-coal mine operator of such machines including any associated electrical equipment, electrical components, and electrical accessories. Approvals will not be issued under the provisions of this Subpart E for ...

MSHA - Program Policy Manual - Volume V; 77.501 through 77 ...

Subpart H does not specify approved methods of grounding the metallic enclosures of portable or mobile equipment receiving power from high-voltage systems since the requirements for grounding such enclosures are specifically contained in Section 77.802.

Equipment Approval & Certification | Mine Safety and ...

portable cables may be connected to a source of electrical energy, and which contains a short-circuit protective device for each outgoing cable. Experimental equipment means any electrical machine or accessory that an applicant or MSHA may desire to operate experimentally for …

Mine Safety and Health Administration (MSHA) | Protecting ...

Testing, Evaluation, and Approval of Electric Motor-Driven Mine Equipment and Accessories (Part 18) Compliance & Enforcement. Commenting on Enforcement Actions to SBA Ombudsman; Compliance Guides and eLaws Advisors; ... Mine Safety and Health Administration 201 12th St S Suite 401 Arlington, VA 22202-5450 www.msha.gov TTY 202-693-9400. About ...

MSHA - Program Policy Manual - Volume V; 77.1103 through ...

One portable extinguisher can serve several adjacent electric motors or transformers.Extinguishers provided and located according to paragraph (a)shall be acceptable as protection for electrical installations within that area, provided such extinguishers are no more than 50 feet from the electrical …

MSHA - Compliance Guide for MSHA's Regulations on Diesel ...

However, if the equipment used to tow the tank trailer is diesel-powered, the equipment would be considered heavy-duty equipment under §75.1908(a)(5), and is required to be equipped with an automatic fire suppression system that meets the requirements of §75.1911. If the towed trailer contains only a tank without electrical components, it is ...

MSHA - Technical Support - Approval and Certification ...

Electrical Safety Division Procedures • Criteria for the Evaluation and Test of Intrinsically Safe Apparatus and Associated Apparatus (ACRI2001) Digitized MSHA Minimum Ignition Curves (Excel) The MSHA minimum ignition curves for methane-air atmospheres were derived from ACRI2001. The hardcopy ignition curves in ACRI2001 remain the official ...

MSHA - Technical Reports - SAFE MEASUREMENT OF GROUND ...

Mine Safety and Health Administration Pittsburgh Safety and Health Technology Center P.O. Box 18233, Cochrans Mill Road Pittsburgh, Pennsylvania 15236 412/892-6954 ABSTRACT. The mining industry uses a large amount of electric power. Their equipment is subject to extreme environmental conditions and mechanical shock.

Carbon Dioxide (CO2) Fire Extinguishers | Missoula ...

Standard for Portable Fire Extinguishers NFPA 10. 1.1* Scope. The provisions of this standard apply to the selection, installation, inspection, maintenance, and testing of portable extinguishing equipment. A.1.1 Many fires are small at origin and can be extinguished by the use of portable fire extinguishers.

MSHA - Program Policy Manual - Volume V; 77.1103 through ...

One portable extinguisher can serve several adjacent electric motors or transformers.Extinguishers provided and located according to paragraph (a)shall be acceptable as protection for electrical installations within that area, provided such extinguishers are no more than 50 feet from the electrical …

CDC - Mining - Electrical Equipment Explosion Protection ...

In particular, U.S. coal mines and other gassy mines are required to use equipment in certain areas of the mine that has been approved by the Mine Safety and Health Administration (MSHA) for use in a methane and coal dust environment to limit the risk of the equipment creating an ignition-capable spark or a thermal energy ignition.

Electrical Safety Alert | Mine Safety and Health ...

Aug 07, 2019· Prevent Electrical Accidents. Lockout/Tagout circuits before working on electrical equipment.; Don't rush. Never work alone. Talk to coworkers and confirm your plan is safe. Identify and control all hazardous energy sources before conducting any task and follow safe work procedures.. Open the circuit breaker or load break switch to de-energize the incoming power cables or conductors

PARTS-WIRING TECHNICAL MANUAL

EXPLOSION PROOF ELECTRICAL EQUIPMENT - HAZARD WARNINGS Caution Statement (Required by 30CFR PART 18) To retain permissibility of this equipment the following conditions shall be satisfied: 1. General Safety. Frequent inspection shall be made. All electrical parts, including the portable cable and wiring, shall be kept in a safe condition.

Approval and Certification Center | Mine Safety and Health ...

MSHA’s Approval and Certification Center (A&CC) approves and certifies certain mining products for use in underground coal and gassy underground metal and nonmetal mines.. Technical experts evaluate and test equipment, instruments, and materials for compliance with Federal regulations. Products evaluated and tested range from extremely small electronic devices to very large mining systems.

Type G Portable Power Cable 6/4 2000V UL Msha Copper EPDM ...

Jun 04, 2000· It is also used for mobile and portable electrical equipment. STANDARDS & REFERENCES • UL Listed – Type W per UL 1650 • Conductors are manufactured in accordance with ASTM and B-172 • Made in accordance with ICEA S-75-381 • NEMA WC-58 – Portable and Power Feeder Cables for Use in Mines and Similar Locations • MSHA accepted

Grounding Requirements for Portable Generators

Article 250 of the National Electrical Code (NEC). Safe Work Practices for Portable Tools include: • Do not use underrated cords—replace them with appropriately rated cords that use heavier gauge wires. • Never use electrical tools or appliances with frayed cords, missing grounding prongs, or damaged or cracked housings.

MSHA Approval Process

approved equipment is described. A proposed regulation that would broaden the scope of design standards accepted by MSHA is discussed. KEYWORDS Mine Safety and Health Administration (MSHA), Approval and Certification Center, A&CC, Approval, Certification, Title 30 Code of Federal Regulations, and 30 CFR. INTRODUCTION

We’re here when you need us the most

• MSHA Approved • RoHS Compliant. View in Online Catalog > Conductor: 18 through 10 AWG fully annealed stranded bare copper. Industry Approvals: • UL Flexible Cord - UL 62 • CSA Flexible Cord - C22.2-49 • MSHA Approved • RoHS Compliant. View in Online Catalog > Applications: • Portable tools and equipment • Temporary and ...

Forms & Online Filing | Mine Safety and Health ... - MSHA

Apply for individual field approvals by MSHA for electrically operated machines commercially built, or constructed, by the owner-coal mine operator of such machines including any associated electrical equipment, electrical components, and electrical accessories. 2000-238 : Representative of Miners Designation Form

Certificate of Electrical/Noise Training | Mine Safety and ...

Apr 15, 2015· 30 CFR 75.153(g) and 77.103(g) require that an individual who is a qualified electrical person in accordance with Section 75.153 and 77.103 shall annually certify to the district manager that he has satisfactorily completed a coal mine electrical retraining program approved by the Secretary in order to retain that qualification.

Type G Cable and G-Gc Cable – 2000 Volt – UL Msha Approved ...

Type W Portable Power Cable Industrial Grade Single and Multiconductor Portable Round Power Cable 2000 Volt. 90°C (-40°C). Oil and Sunlight Resistant. Single Conductors Listed as Type RHH/RHW-2. UL and c(UL) Listed.MSHA Approved. RoHS Compliant

Federal Register :: Testing, Evaluation, and Approval of ...

Nov 19, 2020· The Federal Mine Safety and Health Act of 1977 (30 U.S.C. 801) (Mine Act) requires the Mine Safety and Health Administration (MSHA) to establish requirements for the technical design, construction, and testing of electrical products that must be approved by MSHA prior to use in gassy mines. These regulations are divided into separate parts ...

Safety Inspection Logs | Mine Safety Books | MSHA Compliance

Electrical Check Mine Examination Book contains examination of low-medium power circuit breakers, examination of electrical equipment, testing of grounding devices and diodes, examination of methane...

30 CFR § 18.2 - Definitions. | CFR | US Law | LII / Legal ...

(A portable cable is that portion of the power-supply system between the last short-circuit protective device, acceptable to MSHA, in the system and the machine or accessory to which it transmits electrical energy.) Portable equipment means equipment that may be moved frequently and is constructed or mounted to facilitate such movement.

Use of equipment. - 1910.334 | Occupational Safety and ...

Portable electric equipment. This paragraph applies to the use of cord and plug connected equipment, including flexible cord sets (extension cords). 1910.334(a)(1)Handling. Portable equipment shall be handled in a manner which will not cause damage. Flexible electric cords connected to equipment may not be used for raising or lowering the ...

Type W Power, Round Portable, Epr/CPE 2000 Volts, Four ...

Type W Power, Round Portable, Epr/CPE 2000 Volts, Four Conductor UL/Msha Listed , View Complete Details (specifications size,chart data,sheet,full form) about Type W Power, Round Portable, Epr/CPE 2000 Volts, Four Conductor UL/Msha Listed ,Find Type W Power, Round Portable, Epr/CPE 2000 Volts, Four Conductor UL/Msha Listed from Supplier or Manufacturer ,Factory price

Type G Cable and G-Gc Cable – 2000 Volt – UL Msha Approved ...

Type W Portable Power Cable Industrial Grade Single and Multiconductor Portable Round Power Cable 2000 Volt. 90°C (-40°C). Oil and Sunlight Resistant. Single Conductors Listed as Type RHH/RHW-2. UL and c(UL) Listed.MSHA Approved. RoHS Compliant

Electrical Hazards - OSHA

Electrical Hazards Electrical hazards can be found in nearly every roofing work site. Whether the hazard is posed by worn or damaged power tools or cords, improperly grounded tools or equipment, or the presence of standing water, it is the responsibility of the contractor to make sure the tools and equipment

Using electrical tape to repair minor damage to the outer ...

Dec 16, 1998· First, Section 1926.403(a) requires that "all electrical conductors and equipment shall be approved." This standard precludes the use of approved electrical conductors and equipment if their characteristics are significantly altered.

Calvert Wire & Cable: Portable Cable

The cable is designed for hard usage with portable tools, equipment and motors. The highly flexible cable is constructed of color-coded polyvinyl chloride (PVC) insulation and polyvinyl chloride (PVC) jacket. Good flexibility in low temperatures Indoor/outdoor rated Water, oil and sunlight resistant UL listed, CSA certified and MSHA approved

Part 46 - MSHA

Section 115 of the Federal Mine Safety and Health Act of 1977 (Mine Act) and 30 CFR Part 46 require operators to have an approved training plan under which miners are provided training. Part 46 training plans are considered "approved" if they contain, at a minimum, the information listed in § 46.3(b).

Personal Protective Equipment For Mining - MSHA U

Respiratory Devices and Self-Contained Self-Rescue (SCSR) Equipment . MSHA Standards – 30 CFR Part 57.15030 Underground “Provision and maintenance of self-rescue devices – A 1-hour self-rescue device approved by MSHA and NIOSH under 42 CFR part 84 shall be made available by the operator to all personnel underground.Each operator shall maintain self-rescue devices in good condition.”

Electrical Wire Terms & Definitions SOW, SEOW Cable

(Type W) - An industry designation for a 2kV portable power cable, double jacket, consisting of 1 - 6 insulated conductors. For use in mines and similar severe duty applications. Type W cable is UL listed and MSHA approved Type W cable is Recognized in NEC article 400 Type W cable is OSHA approved

elaws - MSHA Fire Suppression and Fire Protection Advisor

Glossary for Electrical Equipment. NRITL---- Nationally Recognized Independent Testing Laboratory. Portable Fire Extinguisher . Multipurpose dry chemical with a 2A:10B:C rating, listed or approved by a nationally recognized independent testing laboratory. "Attended" for Electrical Equipment has the following meanings:

GRAINGER APPROVED Portable Cord, Number of Conductors …

Portable cord is flexible, moveable electrical cable that consists of one or more insulated conductors enclosed in a jacket. It is typically used for temporary power connections. Portable cord can be exposed to constant flexing and harsh environmental conditions, including temperature extremes, oil, chemicals, and abrasive materials.

MSHA testing and approval of bearing temperature equipment ...

Dec 29, 1988· The first is a portable, battery-powered instrument, the Model No. TE-4320 Portable Temperature Monitor. ... (Dusts composed of agricultural products) location based on the area classification system of the National Electrical Code (NEC). MSHA has not specifically approved the Topf Enterprises equipment for use in Class II, Division 1, Group G ...

Petition - Mine Safety and Health Administration (MSHA)

Electrical equipment must be permissible and maintained in a permissible condition when such equipment is located within 150 feet of pillar workings or longwall faces. ... All portable methane detectors shall be MSHA approved and maintained in permissible and proper operating condition as defined in 30C.F.R. § 75.320. ... in a handheld ...